10
Installing the Mounting Bracket and
Screen Housing Assembly
Securing the Mounting Bracket
The Mounting Bracket of the Vista Plus Screen is installed
on the right inside surface of the door frame. The ideal
minimum dimension of this surface is 1 5/8” (42 mm).
This surface must be perfectly flat and at a right angle
(90º) to the door.
If the mounting surface is greater than 1 5/8” (42 mm),
the Mounting Bracket can be positioned anywhere on this
surface. Seiki recommends positioning the Mounting
Bracket flush with the edge of the door frame (the
furthest point away from the door.)
1.
Locate the “L” shaped edge of the Mounting Bracket.
(A)
The Mounting Bracket will be positioned with
this edge closest to the door.
2.
Remove the adhesive strip on the back of the
Mounting Bracket and position on the mounting
surface.
(B)
3.
Using a level, adjust the Mounting Bracket to ensure
that it is positioned plumb.
4.
Attach the Mounting Bracket to the door frame using
the 5/8” (16 mm) Pan Head Screws provided.
Attaching the Screen Housing Assembly
1.
Place the front right corner of the Screen Housing
Assembly in the outside edge of the Mounting
Bracket.
(C)
2.
Pivot the Screen Housing along this point until the
back of the Assembly snaps into the “L” shaped
edge on the back of the Mounting Bracket.
Mounting Bracket
5/8” (16 mm)
Screw
“L” Shaped Edge
Mounting Surface
Mountin
g
Bra
c
ket
S
c
reen Housin
g
Snap S
c
reen Housin
g
into “L” Shape
d
E
dg
e of Mountin
g
Bra
c
ket
S
c
reen
Housin
g
Mountin
g
Bra
c
ket
A
C
B
