- 18 -
8. Error display
The YFC-35 controller shows error code number when it detect any failure during
operation.
The error code are as below
No
Code
Description
Trouble shooting
1
101
Screwdriver not connected
Check the cable connection
2
111
SMPS fault.
The power supply system will
be shut down by overload
Turn off the power and On again after
1 min.
3
112
Overload
protection
Automatic reset. refer to 5.2 protection
4
113
Over Temperature protection
Automatic reset. refer to 5.2 protection
5
114
Over Speed error
When the speed monitored over the
target, it show E114.
Check motor condition.
