- 15 -
6.2.6 Multi-hit setting ( M_hit ) .......... P6
Number of torque up by clutch can be selected from 1 to 10 times.
Factory setting is 1 time.
6.2.7 Mult-sequence ( M_FSt ) .......... P7
Available to program multi step operation in sequence.
oFF : Disable
on : Enable
6.2.8 Multi_1 : First angle in turn ( Frt.Ag) .......... P8
Angle setting for angle stop in turn from 0 to 9999 ( unit = 0.1 turn )
6.2.9 Multi_2 : Second reverse angle for next step of operation ( rEV.Ag ) .......... P9
Angle setting for angle stop in turn from 0 to 9999 ( unit = 0.1 turn )
6.2.10 Multi_3 : Holding time for next step of operation ( hLd.ti ) .......... P10
Time setting of holding to next step from 0 to 99 ( unit = 0.1 sec )
6.2.11 Display setting ( dSP.Md ) .......... P11
Display setting between two;
0 : number of speed setting
1 : real time speed
6.2.12 External I/O for remote control ( PLc.Md ) .......... P12
Available to use I/O for remote control.
oFF : Disable
on : Enable
4.2.13 Reverse torque control setting ( REvMd ) .......... P13
Reverse torque control can be selected between ON/OFF .
Factory setting password is "
on "
on : Stop by torque up
off : Slip
6.2.14 Password setting ( PYord ) .......... P14
Setting new password.
Factory setting password is " 0 "
