SEH EPS TSE Server 8, Руководство пользователя

Страница: 20 / 68

Manual [en] 18

The settings will be saved.
How to Configure Network Settings
During the hardware installation (

8) the Fiscal Server is connected to the
network. The Fiscal Server then checks if it receives an IPv4 network
configuration (IP address, subnet, gateway, DNS - Domain Name Service)
dynamically over DHCP (Dynamic Host Configuration Protocol). If this is not the
case, the Fiscal Server assigns itself an IP address via Zeroconf from the address
range (169.254.0.0/16) which is reserved for Zeroconf.
The IPv4 address assigned to the UTN Server can be found in the SEH Product
Manager software tool. This step is usually performed during hardware
installation (

8).
As an alternative to automatic configuration via DHCP or Zeroconf, you can
assign a manual (static) IPv4 network configuration to the Fiscal Server.

For DHCP: Your network has a DHCP server.

For DNS: Your network has a DNS server.
1. Start the EPS TSE Server Control Center.
2. Select the SETTINGS – Network menu item.
3. Specify the IPv4 network configuration in the Network dialog

Table 2

18.
4. Specify the DNS parameters in the DNS dialog

Table 2

18.
5. Click Save to confirm.

The network settings have been saved.
Table 2: Network
Parameters Description
DHCP Enables the DHCP protocol.
If DHCP is enabled in your network, IPv4 network
configuration (IP address, subnet mask, gateway, DNS) is
automatic.
We recommend disabling this option once
an IP address has been assigned to the Fis -
cal Server.
Static Enables the assignment of a static IPv4 network
configuration.
Configure the IP address, subnet and gateway.
IPv4 address
[ip-addr]
IP address of the Fiscal Server.
Subnet
[ip_mask]
Subnet mask of the Fiscal Server.
Subnet masks are used to logically partition big networks
into subnetworks. If you are using the Fiscal Server in a
subnetwork, it requires the subnet mask of the
subnetwork.