SEH EPS TSE Server 8, Руководство пользователя

Страница: 19 / 68

17 [en] Manual
2. Select the TSE MODULE menu item.
A table with information on the connected TSE modules is displayed.
3. Click the Eject button for one of the displayed TSE modules.
 The TSE module is ejected and can be removed from the Fiscal Server.
How to Specify a Device Description
You can assign freely definable descriptions to the Fiscal Server. This gives you a
better overview of the devices in the network.
1. Start the EPS TSE Server Control Center.
2. Select the SETTINGS – Device menu item.
3. Enter freely defined descriptions in the Host name, Contact and Descrip -
tion fields in the Description dialog

Table 1

14.
4. Click Save to confirm.
 The settings will be saved.
How to Configure the Device Time
The Fiscal Server has a device time. Correct time information is required for
some network mechanisms, such as authentication for example.
The Fiscal Server device time can be set via an SNTP time server (Simple
Network Time Protocol) in the network. A time server synchronizes the time of
devices within a network.
In general, today's primary time standard 'UTC' (Universal Time Coordinated) is
used. The time zone compensates for location.

The network has a time server.
1. Start the EPS TSE Server Control Center.
2. Select the SETTINGS – Device menu item.
3. Enter the IP address or host name of the time server in the Time server field
of the Date/Time dialog.
(The host name can only be used if a DNS server was configured beforehand

18
.)
4. From the Time zone list, select the code for your local time zone.
5. Click Save to confirm.
Important:
Observe the value conventions during input

14!
Important:
If your network is appropriately configured, the Fiscal
Server receives the time server settings automatically
via DHCP (

18). A time server assigned in such a
manner always takes precedence over a manually set
time server.