Rev 1
User Manual Double Disconnect 2500A
Segen Solar (Pty) Ltd Reserves the right to implement
changes to specifications depicted in this Installation manual
to conform to equipment or regulatory requirements
to conform to equipment or Regulatory requirements
Mounting:
The board is designed to be floor mounted. Please ensure that the chosen surface is suitable
in order to support the weight of the board, for example Concrete Plinth.
It is recommended that the board is mounted vertically.
Please ensure enough clearance area below the board to facilitate the incoming and
outgoing cables. Cables must be installed in such a way to maintain the cable manufacturers
recommended bending radius. See Fig 1.
Bending Radius according
To cable manufacturer
specifications
Height according to
cable connection
requirements
Fig 1.
DDU control unit
