Sega THE KING OF ROUTE 66, Руководство по обслуживанию

Страница: 99 / 176

3.8. SHIFT LEVER
If the SHIFT LEVER SWITCH is not showing an input in the TEST MODE, replace the switch. Remove the
Shift Lever Unit and apply grease to the mechanism’s sliding portion once every three months.
·
When performing work, be sure to turn power off. Working with power on can
cause an electric shock or short circuit.
· Use care to ensure the wiring is not damaged. Damaged wiring can cause
electric shock or short circuit.
·
Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
3.8.1. REMOVING SHIFT LEVER
1. Turn the Power Switch OFF.
2. Remove the four tamperproof screws and lift out the Shift Lever Unit far enough to access the connector.
3. Disconnect, and withdraw the Unit completely.
4. Reinstall in reverse order, ensuring the Unit is orientated correctly (see sketch below).
3.8.2. SWITCH REPLACEMENT
1. Disconnect the switch to be replaced.
2. The switch is secured with two M2 screws. Remove them to replace the microswitch.
3.8.3. GREASING
Apply grease to the Grease Points indicated once every three months. Use a proprietary synthetic lubricant.
26