background image

FASTMELT 650

QUICKSTART GUIDE

Follow the appropriate steps below to properly maintain the system.

1

  Remove and replace hydraulic filter

1

  Replace hydraulic fluid with #46 or equivalent.

Wear protective gloves, clothing, and face shield at all times

 

Check all connections and ensure there are no gas leaks

 

Do 

not leave kettle unattended when lit

Avoid breathing propane gas flames

Never heat thermoplastic material above 445°F

 

Do not over-fill kettle

In case of molten thermoplastic burns, submerge in cold water and seek immediate medical aid.  Do not attempt to remove thermoplastic from skin.

inside kettle top.

1

  

Grease shaft bearing with lubriplate AC-2A, Enco Andock B or equivalent.

2

  

Change engine oil at least every 24 hours of operation, and maintain 

oil change records.

 

3

  Check material and oil temperature gauges with a long stem, 

high-temperature thermometer.  Calibrate gauges when necessary.

4

  Check interior of kettle and remove excessive resin buildup, particularly 

1

  Check hydraulic oil level.

2

  Check that hydraulic shut-off valve is open.

3

  Check propane lines.

4

  Check hydraulic lines for leaks and hose deterioration.

 

5

  Check engine oil level.

6

  Check propane tank condition.

Tanks should be leak-free and rust-free.

SAFETY

MAINTENANCE

DAILY MAINTENANCE

WEEKLY MAINTENANCE

BI-ANNUAL MAINTENANCE 

(Every 6 Months)

ANNUAL MAINTENANCE 

(Every Year)

2811 Fiechtner Drive

Fargo, ND 58103 

701-367-9233 Phone

701-277-7073 Fax

epicsolutions.us

The FastMelt 650 is a completely self-contained thermo-

plastic melting system that holds 650 lbs. of material.

It’s one of the most versatile/efficient supply systems with 

the ability to be placed in the back of a pickup, flat-bed 

truck, or a work trailer for easy transport.

Compatible with any Thermomark applicator and most 

competitive models.

PURPOSE

Отзывы: