Sega THE KING OF ROUTE 66, Руководство по обслуживанию

Страница: 131 / 176

5.3.2. INPUT TEST
Selecting INPUT TEST displays the following screen and allows the status of each input device to be
checked.
In this mode, periodically check the status of each input devices.
INPUT REST
SERVICE OFF
TEST OFF
START OFF
VIEW OFF
HORN OFF
WIPER OFF
SHIFT [D] OFF
SHIFT [R] OFF
HANDLE 11H
ACCEL 10H
BRAKE 11H
CB-MIC RECOGNITION
[TALK] OK OFF
CB – MIC INPUT 000000 Not displayed while CB-NOT IN
USE
CB-MIC BUTTON OFF
PRESS TEST + SERVICE BUTTON TO EXIT
The Test Mode ensures that all mechanisms are functioning optimally.
● When pressing each switch, if the display next to the item changes to ON form OFF, the switch and the
wiring connection are satisfactory.
● For the Steering Wheel, the Accelerator (Gas Pedal) and the Brake, operate each input device and check
to see if the value changes in accordance with operation.
Items to be checked:
● Each switch [SERVICE, TEST, START, VIEW CHANGE, HORN, WIPER, SHIFT (D & R)]
● Each volume [STEERING WHEEL (HANDLE), ACCELERATOR, BRAKE, CB-MIC]
About the CB-MIC
CB-MIC RECOGNITION shows the status of the voice recognition feature. Say “OK” into the MIC while
pressing the MIC Button. If the reading is accurate, the indicator will display OK; if recognition was not
successful, the BAD display will be shown. When there is no recognition enabled at all, the display will read
OFF.
Press button → Say “OK” once → Release button → Test Results displayed
If the test result is BAD, recognition may have failed due to a few different factors. Continue the test keeping
in mind the volume of background noise, intonation of input, and reconfirm that the button is held down at
the time of input.
● CB-MIC INPUT confirms connectivity between the microphone and other components. After speaking
“OK” into the MIC, if the input reading reaches above 1000, the MIC is functioning optimally.
● The CB-MIC Button is specifically for microphone use. It will turn ON when the main switch is on.
Note: Repeating the test command while pressing the button (i.e. “OK, OK, OK....”) will prevent the test
from running successfully.
Simultaneously pressing the SERVICE Button and the TEST Button returns the display to the Game Test
Menu screen.
58