Sega Racing Classic, Руководство пользователя

Страница: 69 / 166

60
ACCELERATOR & BRAKE
13
ACCELERATOR & BRAKE
● When working with the product, be sure to turn the power off. Working with
the power on may cause an electric shock or short circuit. However, the unit
must be switched on when using TEST MODE. Do not touch any part of the unit
except those areas indicated.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a risk of fire.
● This work should be performed by the site maintenance individual or other
skilled professional. Performing work with non-technical personnel can cause
electric shock.
● To prevent accidents while working or while operating the product after it has
been installed, be sure not to conduct any procedures other than those given
in this manual. There are cases in which procedures not covered in this manual
require special tools and skills. If a procedure not given in this manual is
required, request service from the office given in this manual or from the point
of purchase.
● Carefully read the “Usage Precautions” that come with the grease used in
periodic maintenance work and make sure that you understand them. Improper
use can lead to accidents.
After adjusting or replacing the volume, always go to the DRIVE BD TEST or INPUT
TEST screen in GAME TEST MODE and set the mobility value.
Do not touch the steering wheel when switching the unit on. The steering wheel
undergoes automatic initialization immediately after the unit is switched on.
When the accelerator and brake pedal do not operate properly, either the volume attachment position must be
adjusted, or the volume must be replaced. Also, the gear alignment position and spring should be greased once every
3 months.
13