Sega Racing Classic, Руководство пользователя

Страница: 90 / 166

81
TROUBLESHOOTING
PROBLEMS CAUSE COUNTERMEASURES
No response from Steering
(Servomotor).
Failure of power-on checking
procedure.
Reconnect the power and complete a power-on
checking procedure. (See Section 6-4.)
Faulty connector connections. Check the connections for the connectors
between the game board and servodriver and
between the servodriver and the servomotor.
Thermal element in the
Servodriver is operating.
Occurs when the internal temperature reaches
70°C (158°F) and corrects automatically when
the unit cools.
Steering (Servomotor) is
weak in its force feedback.
Aging of the force feedback
mechanism.
Reset in the TEST MODE. (See Chapter 9.)
The accelerator or brake does
not perform appropriately.
Faulty volume attachment or
adjust gear alignment.
Adjust the volume attachment and verify in
TEST MODE. (See Chapter 9, 13.)
Faulty connector connection. Check the connections for the accelerator and
brake connectors and the connectors between
the accelerator, brake and cabinet.
Failure of the volume. Replace the volume. (See 13-1, Volume:
220-5753).
START button and VIEW
CHANGE button input does
not work and they do not
flash.
Faulty connector connections. Check the connections for the connectors
between the I/O Board, the cabinet and the
control panel and those inside the control
panel.
START button and VIEW
CHANGE button input
works but they do not flash.
Unverified settings or operation. The START button only flashes when Free
Play is set. Check the operation in TEST
MODE. (See Chapter 9.)
The lamp is burnt out. Replace the lamp. (See Chapter 16.)
Network play does not work. Network play is wrongly set. Reset correctly. (See Chapter 9, 19.)
The LAN cable is not connected
correctly.
Check to make sure the LAN cable is
connected. (See Chapter 19.)
Damage of the LAN cable. Replace the cables. Contact the point-of-
purchase for this product.
CIRCUIT PROTECTOR
Functions due to the activation of bimetal. To restore the function, wait for approximately 1 minute or longer until
the bimetal cools off. (Press the button.)
18
CIRCUIT PROTECTOR