Sega Let's Go Jungle, Руководство пользователя

Страница: 95 / 167

90
CONTROL UNIT
11
4
Remove the right grip. Be careful when remov-
ing the grip as the pieces inside may come free.
When disassembling and cleaning individual
parts, be careful of the direction you attach the
trigger bumper. Attaching it in the wrong direc-
tion may lead to a malfunction in the operation
of the trigger.
FIG. 11-4c
5
The microswitch is slotted into the left grip.
Remove it gently, being careful not to damage
the wires.
FIG. 11-4e
6
The wire attached to the microswitch will be used with the replacement microswitch. Remove the old heat
shrink tubing attached to the wire using the nippers or cutters.
7
Use the soldering iron to remove the wire soldered to the microswitch terminal.
8
Pass the wire through each of the heat shrink tubes.
9
Solder the wire to the terminal on the replacement microswitch. Use the wiring diagram to make sure you
don’t solder in the wrong place.
FIG. 11-4d
MIRCOSWITCH
601-11823
TRIGGER BUMPER