Sega Let's Go Jungle Скачать руководство пользователя страница 51

Страница: 51 / 167

PRECAUTIONS WHEN MOVING THE MACHINE

● Always disconnect the power cable before moving the product. If it is moved

with the power cable connected, the cable could be damaged, causing fire or

electric shock.

● To move the unit over the floor, pull in the adjustors and have the casters con

tact the floor. While moving the unit, be careful that the casters do not roll over

the power cord or the ground wire. If cord or wire is damaged, there could be

electrical shocks and/or short circuits.

● When crossing a sloped or stepped area, disconnect the DLP, Main Cabinet

and Seat Cabinet. If you tilt them while connected together, the connection

points may be damaged and personnel could be injured.

● When lifting the cabinet up steps, you must hold it by the designated handles or

by the bottom surface. Lifting it by any other area may lead to damage or dis

figuration to that part or surrounding parts due to the weight of the cabinet and

could also lead to injury of personnel.

● When tilting the cabinet to move it across a sloped or stepped area, always use

at least two people. Attempting such an operation alone can lead to accident

or injury.

● When moving the components separately, take care concerning the direction

you push the DLP and Seat Cabinet in. These elements may fall over, causing

damage or an accident.

● When moving the components do not push any of the plastic elements or

shaped parts. Do not use them to pull the components along either. This may

damage the parts or the surrounding parts and this could lead to accidents or

injury.

● After dividing the components to move them, do not use the Control Units in the

Main Cabinet to push or pull the cabinet. This may damage or disfigure these

parts and lead to malfunctions or injury.

● When moving the separated components, the Top Board on the Seat Cabinet

ceiling protrudes out. Be careful not to bang your head on it while working.

● If you move the cabinet with the Side Cloth attached, do not push or pull the

Side Cloth. This may damage the Side Cloth, injure your hand or cause the

cabinet to tip over.

7-1 MOVING THE MACHINE

Содержание Let's Go Jungle








































































































































































Результаты поиска

Содержание Let's Go Jungle

Отзывы:

Похожие инструкции для Let's Go Jungle

Бренды по названию

Популярные бренды

Sega Let's Go Jungle, Руководство пользователя

Результаты поиска

Содержание Let's Go Jungle

Отзывы:

Похожие инструкции для Let's Go Jungle

Бренды по названию

Популярные бренды