Sega Daytona Championship USA, Руководство пользователя

Страница: 114 / 151

106
TROUBLESHOOTING & ERROR CODES
15
Linked cabinets will not sync to-
gether in the attract mode.
Network cables are not connected.
Reconnect the network cables to
each cabinet.
The cabinets are using security keys
from different regions
Ensure each cabinet has the same
region (viewable on the System
Information page of Test Mode).
Cabinets will only link together
from the same region.
Network cables are faulty.
Replace the faulty network cables.
Contact the company from whom
the unit was purchased.
Cabinets are unable to start a Multi-
player session together.
. Network cables are not connected.
Ensure network cables are properly
connected to the cabinets.
Cabinet ID’s are not set up cor-
rectly.
Go into the Network Settings and
ensure each cabinet has a different
Cabinet ID. Confirm the settings
and then the cabinets will reset
with the new changes saved.
The Steering Wheel does not work
correctly in the game.
The Steering Wheel has not been
calibrated correctly.
Go into the Calibration Settings in
the Test Menu and select Calibrate
Steering.
The Pedals do not work correctly in
the game. Vehicles move forward
or backwards with no player input.
The Pedals have not been calibrated
correctly.
Go into the Calibration Settings in
the Test Menu and select Calibrate
Brake and follow the on screen in-
structions. Once this has been done,
select Calibrate Accelerator and
follow the on screen instructions.
No audio can be heard in either
the attract mode, or throughout the
game.
The audio level has not been
correctly set with the Hardware
Volume Control.
Adjust the Hardware Volume
Control until audio in the game can
be heard.
The volume levels within the Sound
Settings in the Test Menu have not
been set correctly.
Enter the Sound Settings menu
from the Test Menu and check
that all volume levels are set to
the appropriate levels. Options are
available within this menu to test
the volume levels of each setting to
make sure each are correct.
High Score Tables have not been
cleared after attempting to clear
them in the Bookkeeping menu.
The high scores have only been
cleared on one cabinet when multi-
ple cabinets are linked together.
When multiple cabinets are linked
together, the high score tables will
only be cleared if the process is
done on all connected machines at
the same time. Each cabinet must
be in the Bookkeeping menu, and
then Clear High Scores should
be selected on each one and then
confirmed. If any cabinets are left
in the attract mode during this,
the high score tables will not be
cleared.