Turning on and off the TV
• Turn on the TV
Connect the AC input cable. At this time the TV will enter standby mode. Press the button on remote control can turn on
TV from standby mode.
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In TV/DTV mode, if there is no signal in fifteen minutes,
the TV will turn off automatically. In PC mode, the TV set will automatically turn off in five minutes if no input signal. When
VGA cable is connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In TV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume adjustment
• Press the VOL+/- button to adjust the volume.
• If you want to switch the sound OFF, press the
.
• You can release mute by pressing the
or increase/decrease the volume.
Changing the Input Source
11
EN
Trento 60cm LED BLU-TV
You can select the input source by pressing the
SOURCE
button on the remote control. Press the
▲
/
▼
button to cycle
through the input source, and press the
ENTER
button to confirm your choice.
Содержание Trento
Страница 1: ...23 6 0cm Trento 23 60cm LED TV T R B LU ...
Страница 2: ...Inhalt Seiten und Rückansicht Trento 60cm LED BLU TV ...
Страница 31: ...Side Real view 6 Trento 60cm LED BLU TV Netzanschlusskabel ...
Страница 104: ...Product of Schmid Electronics GmbH D 66780 Rehlingen Siersburg Germany www seg tv eu ...