Seg MRU3-1, Руководство пользователя

Страница: 24 / 26

24 TB MRU3-1 12.00 E
Setting list MRU3-1
Project: SEG-Job.-no.:
Function group: = Location: + Relay code: -
Relay functions: Password:
Date:
All settings must be checked at site and should the occasion arise, adjusted to the object/item to be protected.
Setting of the parameters
System parameter
Function Unit Default
settings
Actual
settings
U
prim
/U
sek
Voltage transformer ratio sek
D/Y Input voltage correction dependent on the connection of
the input transformer DELT
f
N
Rated frequency Hz v = 50 Hz
LED Flash LED – Display of the activation storage FLSH
P2/FR Parameter switch/external. triggering for the fault
recorder SET1
Protection parameter
Function Unit
Default settings
Set 1/Set 2
Actual
settings
Set 1/Set 2
1/3 1-phase/3-phase tripping U<>1
U< Pickup value for undervoltage element (low set) V 90/210/360*
t
U<
Tripping delay for undervoltage element s 0.04
U<< Pickup value for undervoltage element (high set) V 80/190/320*
t
U<<
Tripping delay for undervoltage element s 0.04
U> Pickup value for overvoltage element (low set) V 110/250/440*
t
U>
Tripping delay for overvoltage element s 0.04
U>> Pickup value for overvoltage element (high set) V 120/270/480*
t
U>>
Tripping delay for overvoltage element s 0.04
RS Slave address of the serial interface 1
RS** Baud-Rate 9600
RS** Parity-Check even
* thresholds dependent on rated voltage 100 V / 230 V / 400 V
**only Modbus