24
Audio setup
[Speaker Setup]
Select the [Speaker Setup] then press ENTER or
Right-direction button to enter the Speaker Setup
Page.
- [Downmix]
•
[Lt/Rt] – if you want to use Dolby ProLogic
decoder to extend 2CH to 4CH, you should
select this option.
•
[Stereo] – if you want to enjoy original music
or Karaoke, you should select this option.
- [Post Drc] - You can set the dynamic digital out
On, Off or Auto.
[Dolby Digital Setup]
- [Dual Mono]
· [Stereo] – if you want to enjoy original music or
Karaoke, you should select this option.
•
[L-Mono] – When you are enjoying Karaoke
and want to listen the only left mono track,
please select this option.
•
[R-Mono] – When you are enjoying Karaoke
and want to listen the only Right mono track,
please select this option.
•
[Mix-Mono] – it will be sound like in a movie
theatre by using two speakers system.
- [Dynamic]
Choose this setting to adjust the line out ratio and
get different effect. If set to FULL, the audio signal
peak value will be the minimum; when set to OFF,
the peak value will be the maximum.
[Equalizer page]
- [Eq Type]
You can set the Equalizer type among None, Rock,
Pop, Live, Dance, Techno, Classic and Soft.
- [Bass Boost] --- On or Off.
- [Super Bass] --- On or Off.
- [Treble Boost] --- On or Off.
[3d Processing page]
Select a virtual surround sound effect that is
produced from the left and right audio channels,
such as concert, living room, hall, bathroom and
etc.
