17
Navigate through the menu
1
Point the remote control directly at the remote
sensor on this DVD player and select the desired
function.
•
Point the remote control towards the remote
control signal receiver on the player front
face.
•
Operation angle: About ±30 degree in each
the direction of the front of the remote sensor.
2
Use the following buttons on the remote control to navigate through the on-
screen menus.
Select menu display language
1
Press SETUP button on the remote control.
The system setup menu is displayed.
2
Select the [OSD Lang], then press
( )
button.
The language options are different
depending on your country or region. It may
not correspond to the illustration shown
here.
3
Press
( ) /
( ) buttons to select a language, then press ENTER button.
5. PLAY
Play from disc
•
DVDs and DVD players are designed with regional restrictions. Ensure that the
DVD video you play is for the same region zone as the player.
•
This DVD player can support play of the following file formats: MP3/WMA/JPEG/
DIVX.
Play a disc
Caution
1
Slide the release switch button on the side of the main unit to release the monitor
panel then pull it open to display the disc compartment.
2
Place a disc with label facing up.
3
Close the monitor panel and start disc play.
4
To stop disc play, press
button.
Button Function
( ) /
( )
Move up or
( ) /
( )
Move left or
ENTER
Confirm a
0-9 numeric
keys
Enter numbers
·
Never place any objects other that discs into the disc compartment.
