SeeTech iHunter 2.0 CIS/FIT, Руководство по обслуживанию

Страница: 49 / 162

SERVICE MANUAL iHunter Series
- 49 -
6-7. DETAIL OF USER SETTING MODE
♣
MODE 2.ID : How to input ID
♣
MODE 7.PRE-BATCH PCS.SETTING
1.Press MODE key to move the “>>” make to select “ 7.PRE-
BATCH PCS.SETTING ” Then press PRINT key to enter the
“ 7.PRE-BATCH PCS.SETTING ”
2.The LCD Display will display as below.
EXIT : Exit the menu.
DEFAULT : Return the standard value.
SAVE : Saves the setting value.
3.If you want to change the
BATCH value, press the MODE key
and select the BATCH number.
4.Change the value using the
▲
/+10 or
▼
/+1 key.
5.After finishing, move the “>>” make to select “
SAVE ” then
press the PRINT key.
6.Display shows the message as left.
7.Press the
RESTART/STOP key.
PRE-BATCH PCS. ADJUSTING
>>EXIT<< DEFAULT SAVE
----------------------------
The Unit of Calc. : 10
BATCH 1 --- 100
BATCH 2 --- 50
BATCH 3 --- 25
BATCH 4 --- 20
BATCH 5 --- 10
- - - - - - - - - - - - - - - - - - - -
| Pl ea se W ait .. .. .. .. |
| Se tt in g Dat a S av in g .. ... .|
- - - - - - - - - - - - - - - - - - - -
USER SETTING MODE (1/2)
------------------------------
1.EXIT(PRESS RESTART KEY)
2.ID --------------------- NONE
3.USER’s ID PRINTING ---- *YES
4.REJECT POCK.ACTIVE ----- *YES
5.REJECT POCK.SIZE ------- *60
6.NUMBER OF PRINTOUT ----- *1
>>7.PRE-BATCH PCS.SETTING
8.SCREEN SAVER – 5Min
9.BUZZER VOLUME - Middle
------------------------------
NEXT HELP – CF KEY
WRITING USER’s ID
------------------------------
! “ # $ % & ‘ ( ) * + , -
. / 0 1 2 3 4 5 6 7 8 9 : ;
< = > ? @ A B C D E F G H I
J K L M N O P Q R S T U V W
X Y Z [
＼ ] ^ _‘ a b c d e
f g h i j k l m n o p q r s
t u v w x y z BackSpace
------------------------------
USER’s ID :
1.Press MODE key to move the “>>” make to select “ 2.ID - “
Then press PRINT key to enter the “ 2.ID – “.
2.The LCD Display will display as below.
Move to left :
CF ( ← )
Move to right : CURRENCY ( → )
Move to up :
▲
/+10 (
↑
)
Move to down : ▼ /+1 ( ↓ )
Delete a character : Select “BackSpace” then press the
PRINT key.
3.If you want to type a selected character, press the
PRINT key.
4.When you finish typing ID, press the
RESTART/STOP key.
USER SETTING MODE (1/2)
------------------------------
1.EXIT(PRESS RESTART KEY)
>>2.ID --------------------- NONE
3.USER’s ID PRINTING ---- *YES
4.REJECT POCK.ACTIVE ----- *YES
5.REJECT POCK.SIZE ------- *60
6.NUMBER OF PRINTOUT ----- *1
7.PRE-BATCH PCS.SETTING
8.SCREEN SAVER – 5Min
9.BUZZER VOLUME - Middle
------------------------------
NEXT HELP – CF KEY