CW-6S MICROCORE OWNER’S MANUAL
|
4
Your MagIQtouch Controller contains a
settings menu, which gives you access to
information about your CW-6S Microcore
Cooler and to extra functions including:
About Appliance
Access information about the appliances
installed in your system.
Min/Max Set Temperature
You can change the minimum and
maximum temperature displayed on your
slider, depending on what temperature
range you prefer your system to work
within.
Night Quiet Mode
Restrict fan speed over the night time
period for a quiet night’s sleep.
Manual Drain
This will turn the rooftop unit off and drain
the tank.
Drain and Dry
This option allows you to nominate a time
each day when the rooftop unit will drain
the tank and run the fan for 1 hour.
Autoclean
Select the preferred cleaning interval
(50 / 100 / 200 hrs). At 8.00am after
the selected running hours has been
reached, the rooftop unit will drain the
tank, fill with fresh water and operate the
pump for 5 minutes. When complete,
drains the tank and returns to previous
operation mode.
External Sensor (optional)
Rooftop units can be
fitted with an external
air sensor. When switched on, it displays a
live external ambient temperature reading
on the wall controller. Where climate
conditions are close to freezing, an external
temperature set point can be programmed
to auto drain the tank and prevent freezing
conditions damaging the tank.
Note!
There are some settings, which
are locked and are only for installers or
service technicians.
CONTROLLER SETTINGS
