SeeEyes SC-04HDH, Руководство пользователя

Страница: 5 / 20

4
3-1-2. SC-04HDS rear side (connection port)
①
VIDEO INPUT : Connect the four (4) cameras
②
VIDEO OUT (Loop Through): It distributes the four (4) input video signals
to other devices by loop trough.
③
MONITOR (Spot) Output: Connect the SD (standard definition) Video
Monitor.
• You can watch the picture of specific channel through the Monitor output,
independently from the video out in live through the HDMI, DVI and VGA
output.
• Selection of Monitor output display
1. Select MENU < SCREEN SETTING < SPOT
2. Press the MENU >
◀▶
buttons in display menu mode, then press [Enter]
>
▲▼
buttons. And then, press the [Enter] > +, - button to change the
setup value.
3. (Ch1~Ch4, HD04), HD04 displays the same picture as the picture displayed
through HDMI port.
4. You can put out a single picture of 1~4CH or the picture entered through
HDMI port through the Monitor output port.
5. You can watch two equal pictures through two BNC-F terminals of Monitor
port.
④
HDMI: Connect the HD (High Definition) Monitor with HDMI input port.
⑤
Serial Port: Connect the RS-232C/ RS-485 to link external devices for
remote control function.
• Data configuration
- Data Length: 8 Bit, Start/Stop Bit: 1Bit, Parity Bit: None, Baud rate: 9,600
bps
- Packet structure
- Control Communication Data format
Byte Value Function
1 0xA0 STX (Launching Data)
2 0x00 ~ 0xFF 0x16 (Device Code)
3 0x00 ~ 0xFF Address (Device ID)
4 Data byte Control Data
5 Check Sum Check Sum = Byte2 + Byte3 + Byte4
① ② ③ ④ ⑤ ⑥ ⑦ ⑤ ⑧ ⑨