SeeEyes SC-04HDH, Руководство пользователя

Страница: 13 / 20

12
5-3-2. Channel Name Display
In this menu, it is possible to set the channel name indication.
Press Menu > press
◀▶
buttons and [ENTER] in Display set > press
▲▼
buttons and [ENTER] in Channel name display > Press
◀▶
buttons to change
the set value.
5-3-3 Sequence Time [Sec]
It is possible to set the display switching time by seconds (1 sec. ~ 30 secs.)
when selecting Auto Sequence mode.
Press Menu > press
◀▶
buttons and [ENTER] in Display set > press
▲▼
buttons and [ENTER] in Sequence time (Sec) > Press
◀▶
buttons to change the
set value.
5-3-4. Video Input Type
It is possible to set the display input format.
Press Menu > press
◀▶
buttons and [ENTER] in Display set > press
▲▼
buttons and [ENTER] in Video input type > Press
◀▶
buttons to change the set
value.
5-3-5. HDMI RESOLUTION SET
It is possible to set the picture resolution that is outputted from HDMI Port.
Before setting, please check the resolution of monitor. If the resolution is set
higher than the available specification, the image may not be appeared on the
screen. In this case, you must use the adequate monitor and change the
configuration.
Press Menu > press
◀▶
buttons and [ENTER] in Display set > press
▲▼
buttons and [ENTER] in HDMI resolution > Press
▲▼
◀▶
and [ENTER] button to
select the desired resolution.
Please cancel the setting, in case that the resolution set in pop-up menu cannot
be supported in the monitor.
5-3-6. Monitor (Spot) Out
This product also provides video signals outport for Standard Definition CVBS
monitor. In this menu, it is possible to set monitor (spot) output screen.
Press Menu > press
◀▶
buttons and [ENTER] in Display set > press
▲▼
buttons and [ENTER] in CVBS > Press
◀▶
buttons to set. (CH1~CH4, HD4)
HD4 displays the same split pictures as those displayed from HDMI port.
5-4. Channel Set
In this menu, it is possible to set up the Channel select, Channel name,
Brightness, Contrast, Hue, Motion detect, Pattern change det. etc.