17
Q6: OLED displays " High-Vt "
Q7: OLED displays " Sen-err"
Q8: The tip fails to take a tin and cause defective joints
Q8: Mini Soldering Iron return to Standby Mode during operation
Trouble Shooting Guide
A1: The voltage may be too high (Excess 24V)
A1: Check if the tip is installed properly
A2: If the tip is installed properly you should consider replacing it
with a new tip.
A1. If the tip temperature rises higher than 400℃, please lower the
temperature.
A2. The tip tins improperly.
A3. If there is not enough flux during operation, please add some
more flux.
A4. Don’t wipe the tip with a high-sulfur sponge or dry fabric.
A5. Don’t use the tip to touch any organic materials such as plastic,
silicone oil or other chemicals.
A1:Check whether the voltage is lower than default (10V). If so,
please adjust or wait until the voltage rises to 10V or higher.
C
M
Y
CM
MY
CY
CMY
K
tiny电烙铁 使用说明.pdf 20 2015/12/7 10:06:59
