16
Trouble Shooting Guide
Q1: No Display
Q 2: Every time when replace a new tip, the temperature vary dram-
atically
Q3: Soldering iron restarts automatically
Q4: Soldering iron is heating intermittently
Q5: OLED displays "Warning!"
A1. Check whether the cable is in a good condition.
A2. Check whether there are any data in USB mode
A3. Check the screen and see whether it needs to be replaced.
A.The phenomena indicates the device is in Auto-detect Mode, which
is normal
A1. Check the power source, whether it is plugged correctly
A2. Check the voltage, if it is lower than the system parameter's
please reset it.
A1. This may happen occasionally when the tip is used for the first time.
A2. Check if the power cord is in loose or contact defectively?
A3: If the tip temperature is too high, please lower the temperature to
an appropriate value.
Set the temperature in appropriate level
A4: If the tip is dirty, please refer to Part 5.3 Soldering Iron Tip
Maintenance.
A1.The Mini Soldering Iron temperature may be higher than the maxi-
mum operating temperature
The warning sign will disappear after the temperature returns to the
working temperature range
C
M
Y
CM
MY
CY
CMY
K
tiny电烙铁 使用说明.pdf 19 2015/12/7 10:06:59
