SARK-110
User’s
Manual
Rev 1.3.8 30 July 2018
- 21 -
© 2011-2018, Melchor Varela
–
EA4FRB
2.10 Changing the Vertical Axis Parameter
In Scalar Chart mode, the SARK-110 can display two traces from any of the available
parameters for the vertical axis. Use Navigator A to select either
«LEFT Y»
or
«RIGHT Y»
in the
main menu.
There are two methods of changing the selected vertical axis parameter:
(i)
Press the Select
[
■
]
button to activate the LeftY or RightY popup submenu. Use Navigator B
to highlight the desired submenu parameter option. Press the Select
[
■
]
button to validate the
selection. Press any other button to cancel the operation.
The screenshot below shows the available parameters for the vertical axis:
(ii)
Use Navigator B when either the
«LEFT Y»
or
«RIGHT Y»
option is highlighted. Options are
selected sequentially.
2.11 Saving and Recalling Measurements
The SARK-110 has the capability to store measurements to the internal disk and recall them
either to review the data later in the analyzer screen or to download the data from the USB disk
