SARK-110
User’s
Manual
Rev 1.3.8 30 July 2018
- 14 -
© 2011-2018, Melchor Varela
–
EA4FRB
(ii)
Use Navigator A to select
«FREQ»
in the main menu. Then use Navigator B to change the
frequency. The frequency will change according to the current frequency multiplier. The
frequency multiplier can be changed from the popup dialog, see
(i)
above.
Ø
Note
: the span range will be adjusted automatically if the resultant upper or lower
frequency entry causes it to fall outside operational limits.
2.6 Changing the Span
There are two methods of editing the Span:
(i)
Use Navigator A to select
«SPAN»
in the main menu. Press the Select
[
■
]
button to display
the popup dialog associated with
«SPAN»
. Then use Navigator B to change the span. The span
will change according to the current span frequency multiplier that is highlighted in reverse video.
Use Navigator A to change the span frequency multiplier position if needed. Press the Select
[
■
]
button to validate the span selection. Press any other button to cancel the operation.
The screenshot below is of the span edit dialog, showing the span frequency multiplier
positioned over digit 6 from right to left (frequency increments of 100 kHz).
