SARK-110
User’s
Manual
Rev 1.3.8 30 July 2018
- 13 -
© 2011-2018, Melchor Varela
–
EA4FRB
2.5 Changing the Frequency
There are two methods of editing the frequency (center frequency for sweep modes):
(i)
Use Navigator A to select
«FREQ»
in the main menu. Press the Select
[
■
]
button to display
the popup dialog associated with
«FREQ»
. Then use Navigator B to change the frequency. The
frequency will change according to the current frequency multiplier that is highlighted in reverse
video. Use Navigator A to change the frequency multiplier position if needed. Press the Select
[
■
]
button to validate the frequency selection. Press any other button to cancel the operation.
The screenshot below is of the frequency edit dialog, showing the highlighted frequency
multiplier positioned over digit 5 from right to left (frequency increments of 10 KHz).
