-9-
12A4A4-00023E-5
3-5 Handling of SD card
1)
Use a computer for important data and take backup to an outside media (hard disc, CD-R, etc.) regularly.
We will not be held liable for any data lost or changed that is registered in the SD card.
2)
Do not remove the SD card or turn the unit power off during write or read. It may cause the data inside the
unit or the SD card to be lost or damaged (deleted).
3)
Please keep the socket terminal of the memory cards and SD card clear of foreign objects.
4)
Do not touch the terminals with fingers or metal objects. It may cause malfunctions.
5)
When inserting the SD card, make sure it is inserted in the correct direction.
6)
Do not apply undue force when inserting/removing.
7)
Do not insert anything other than a SD card into the SD card socket. Also be careful of any foreign objects
entering the socket.
8)
Do not bend, break, or place under heavy objects.
9)
Do not place in areas with sudden temperature change. Condensing will cause malfunctions.
10) Do not place in areas near corrosive chemicals or where corrosive gases evolve. It may cause malfunctions.
11) When cleaning, wipe with a dry soft cloth.
12) When carrying and storing, place the SD card memory card in its protection case
3-6 Handling of Batteries
1)
This product uses primary batteries. Recharging is prohibited
2)
Insulate the terminals with tape when discarding.
It may generate heat, explode, or ignite if in contact with other batteries or metal objects.
Be sure to follow the instructions of the local government (restrictions of the district) when discarding.
3)
Check the polarity and make sure it is connected in the correct direction
4)
Do not store in areas with direct sunlight, high temperature and/or high humidity
5)
Disassembling and modifying is prohibited.
6)
Do not change the batteries with wet hands
7)
Please do not use other than the supplied battery.
8)
Installing the battery should only be performed by trained personnel.
9)
If the EM is VESA mounted, detach from the VESA arm when replacing the battery. Refer to the section,
Mounting on a VESA arm.
10) The battery should only be installed when the unit is powered off.
11) Do not use any metallic item to remove the battery (such as screwdrivers, knives, pliers, and so forth).
12) Be careful to not drop the battery or any associated screws into the unit.
13) Be careful of edges on internal sides of the enclosure and frame.
