-7-
12A4A4-00023E-5
Precautions for Safe Use
Do not press down hard on the display area of EMG7 with hard objects. It may break the LCD panel and may
cause injuries. Also, do not press down on the panel with sharp objects such as mechanical pencils or
drivers. It may damage the displays.
Installing EMG7 in areas out of the range of the specification will cause failures.
Do not use in areas where temperature rises and dwells rapidly. It may cause failures.
Avoid areas where rapid temperature change could cause condensation. It may cause failures.
Do not put any kind of liquid, such as water, or any metal parts into EMG7. It may cause failures or electric
shocks.
Do not use or keep EMG7 in locations with exposure to direct sunlight, high temperature, fine particles,
humidity, and/or vibrations.
Do not use or keep in areas where gasified chemicals are exuded into the air, or where chemical
contamination can occur.
Acid, Alkali, other saline chemicals: Failures due to corrosion
Organic solvents: Fire
If the surface of EMG7 gets dirty, wipe with a dry, soft cloth damped with a neutral detergent then wrung dry.
Do not use thinner or organic solvents.
LCD of display will deteriorate with ultraviolet rays. Do not use or keep in areas under strong ultraviolet rays.
When stored in sub-ambient temperature, LCD of display might coagulate and cause damage to the panel.
Also, when stored in over-ambient temperature, the LCD will turn into isotropic liquid and will not turn back to
its original state. Please store in specified ambient temperature.
After turning off the power of EMG7, leave for a while before turning the power back on. It might not function
normally.
Be sure to take back-up assuming the loss of data in the EMG7 in an event of an unexpected accident.