Seederman GS2 страница 3 Скачать руководство пользователя

Страница: 3 / 20

Introduction

The GS2 and GS3 models are operated in the same fashion. The

differences between the two are that a GS3 model is standard
with a leg kit eliminating the need to place the machine on a
table, and the GS3 is standard with a dibbling unit. The GS2

machine can accommodate a dibbling unit, and both machines
can also be fitted with a Vermiculite dispenser.

The GS2 and GS3 Automatic Needle Seeders were designed for
the small greenhouse grower, but are also suitable in a larger
growing environment.

The speed at which these machines will sow varies greatly upon
several factors including:

Size of tray,

Seed type,

Operator.

You should expect to sow UP TO 180 size 288 trays, or 120 size
512 trays per hour.

This machine will accommodate plug trays from 50 to 512 cells.
The operator can change the sowing kit from one plug tray to

another in less than 5 minutes.

Seederman has designed these popular machine in various sizes

to meet growers demands for additional options (such as dibble
bar and
Vermiculite dispenser), and to allow for more trays across the

table.

Seederman offers a 2 year warranty on all parts (except needles).

Содержание GS2





















Результаты поиска

Содержание GS2

Отзывы:

Похожие инструкции для GS2

Бренды по названию

Популярные бренды

Seederman GS2, Руководство пользователя и инструкция по эксплуатации

Результаты поиска

Содержание GS2

Отзывы:

Похожие инструкции для GS2

Бренды по названию

Популярные бренды