background image

 

Inserting Needles 
 

Your machine came equipped with a set of needles. Each needle has 

qualities that are more suited to different types of seed. Below are some 

examples of seeds and the needles you should use for each. Use this as a 
general guide to help determine the proper needle for the seed you are 

sowing. If you have questions, or need another needle size, please contact 

us. 

 
Color               Size                Seed type 

 

Clear               .008                Petunias, Dusty Miller, Coleus 
Red                 .010                 Impatiens, Tomatoes (small), Carnations 

Orange           .013                 Marigold, Salvia, Vinca, Peppers 

Blue                .016                 Alyssum, Kale, Zinnia, Dahlias, Pansies 
Purple             .020                 Geraniums, Pelletized seed, Brassicas 

Pink                .023                 Large palletized seed 

Green             .033                 Cyclamen, cucumber 

Amber            .054                  Squash, zucchini 

 

 

Insert needles into the tip on the 

needle bar insuring tips of 
needles are facing vertically in 

the down position. Do not use 

undue pressure to insert needle 
into tip as it may cause the tip to 

break. If needle does not insert 

easily, inspect needle and tip for 
debris or damage.  

 

Your kit comes equipped with extra needles 
and needle tips. Replace if necessary. Tips 

are screw mounted, needles are push 

mounted. If you need additional needles or 
tips, please contact us. 

 

When using multiple needles per cell, 

position outside needles slightly inward to 
ensure accurate sowing. 

Figure 2. 

Needle 
bar, drop 

tube and 

seed pan. 

 

Figure 3. Inward position for 

multiple needles per cell. 

 

Содержание GS2





















Отзывы:

Похожие инструкции для GS2