10
Assemble
• Insert the connecting wire and the post into the main unit then tighten the fastening knob
ensure to drive the screw into the positioning hole.
• Press the wheels into the base.
•
Put holder fixed screw through the base, and fix the base to the main unit bottom.
• Mount the rear grill, grill nut, blade, blade nut and net clamp.
•
Press the misting board into the corrugated hose, and fix the misting board with screws on
the front grill.
• Mount the front grill into the net clamp, screw in the net clamp and then tighten the
screws. Mount the corrugated hose on the top of the main unit.
INSTRUCTIONS FOR USE
• ON/OFF(POWER) : Press On/Off button one time to activate the fan. Press On/Off but-
ton a second time to turn on the fan. Press On/Off button when the unit is on to turn off it.
• SPEED : it cycles in the sequence of low - mid - high - low .
• TIMER : it cycles in the sequence of 0.5H-1H-2H-4H. When the unit is operating, you
can set the timer to switch the fan off automatically after the set time. Press the timer
button repeatedly to select the desired time period in half hours increments: from 0,5h to
7,5h. The related indicator light will illuminate on the control panel. When all the light are
off means that time is not setted and the unit will continuously work until you switch off
manually the unit.
• MIST : it cycles in the sequence of low - mid - high.
• MODE : it cycles in the sequence of Normal wind - Natural wind - Sleep wind .
• OSC (oscilation) : it controls the left and right swinging.
Control panel
Remote Control
