Powerstick
5 Operation
12
5.4.2
Preset Bank 2 – Default Settings
1 -
2x HP 50 Hz:
Preset for use when the second amplifier channel is powering a mid-
high system (e.g. X1, A2 or X4) connected to SpeakON sockets (3)
and (4). The high-pass filter at 50 Hz is a protection high-pass.
2 -
2x Low-Boost:
Flat preset with a low-frequency boost for use when the second am-
plifier channel is powering a mid-high system (e.g. X1, A2 or X4) con-
nected to SpeakON sockets (3) and (4). This setting is useful in full-
range applications in which strong bass reproduction is required, but
a subwoofer cannot be used. The achievable low-frequency level is,
however, limited.
3 -
Top + Sub 160 Hz:
Preset with a higher cross-over frequency for use when smaller mid-
high systems (e.g. A1 or X1) are connected to SpeakON socket (3) in
combination with a subwoofer system (at min. 4 Ohm) on SpeakON
socket (5). The cross-over frequency in this preset is approx. 160 Hz.
4 -
Top + Sub 120 Hz:
Preset with a higher cross-over frequency for use when mid-high
systems (e.g. A3 or X4) are connected to SpeakON socket (3) in
combination with a subwoofer system (at min. 4 Ohm) on SpeakON
socket (5). The cross-over frequency in this preset is approx. 120 Hz.
