Seeburg Galeo System, Руководство пользователя

Страница: 9 / 20

SEEBURG acoustic line
9
The Galeo combined with the Galeo XT
Using a transition cradle Art. No. 01392, Galeo units can also be flown below a
Galeo XT line array. Due to the specific geometry of the transition cradle, the
cylindrical sound source within the mid-high range is continued; it can therefore
be employed for virtually gapless down-fill operation with strong curving.
Featuring the same high frequency drivers and the same midrange driver
arrangement, the Galeo can be regarded as the the Galeo XT’s “little brother”.
Therefore, the Galeo can by all means be additionally employed when the
given maximum level requirements within the mid-high range cannot be
achieved using the Galeo XT on its own, or if strong curving is desired at the
lower end of the line array. A maximum of 6 Galeo units may be attached to the
transition cradle and the permitted maximum load for the Galeo XT flying frame
must not be exceeded.
The transition cradle is secured in the upper borehole in the Galeo XT spacer
of the lowermost unit using a ball lock pin. Galeo units are then attached as
described later (Part 2 – and Rigging).
Remember that when setting up the Galeo and Galeo XT, the delay times for
the mid and high ranges must have the same setting. A separate Galeo
controller setting is necessary to ensure the ideal addition over the complete
length of the array.