Seeburg Galeo System, Руководство пользователя

Страница: 10 / 20

SEEBURG acoustic line
10
Part 2 – Assembly and Rigging
Transportation
For transportation of the Galeo, four units are packed in a flightcase (Art. No.
16002). For assembly, either just the cover or the complete hood is removed
from the case. The angle of the units stacked below each other must always be
0° in the flightcase, and the two ball lock pins for assembly on the flying frame
should be located in the rear fitting of the topmost Galeo element. The short
Speakon connector cables NL4 can remain on the elements. When replacing
the hood on the case or lowering the Galeo line array into the case, ensure that
the viewing windows are on the rear side of the Galeo. This will enable you to
check completeness and serial numbers at a glance.
For transportation purposes the wheelboard Art. No. 01270 can be attached to
the front of the Galeo Sub. Place both hooks (catches) in the upper and lower
mounting eyes and then tighten the butterflies. Using the handle located on top
the Galeo Sub can now be tilted forward onto the wheels.
For transportation in a truck or on inclined surfaces it is essential to engage the
wheel brakes of the Galeo flightcase. The Galeo Sub is placed upright on the
floor space to prevent rolling.
For transporting two Galeo flying frames a separate accessory flightcase Art.
No. 16003 is available in which replacement ball lock pins can also be stored.
The Galeo Sub flying frame can remain attached to the Galeo Sub during
transportation.