Seeburg Galeo System Скачать руководство пользователя страница 3

Страница: 3 / 20

SEEBURG acoustic line

Foreword

The GALEO Line Array System is suitable for a wide range of sound

applications for which a fast set-up, high sound quality, long throw and

predictable directivity are crucial. It is particularly suitable for high-end

permanent installations.

The Galeo Sub with integrated flying hardware for flown array applications and

groundstack operation serves as a bass extension. Thanks to hornloaded

bandpass technology in conjunction with the 18“ ND long excursion chassis

with exceptionally powerful drive conceived exclusively for this unit, the Galeo

Sub offers a high level of bass, lowest distortion and a long throw.

Please read this user manual carefully and follow the instructions provided. It

should be within reach at all time when setting up the Galeo system in order to

be able to find a solution to any queries.

With the purchase of a Galeo system you will have also received a structural

analysis certificate that will provide information on the materials used and their

maximum resilience.

Should you require additional information or have any helpful suggestions

regarding this user manual, please contact

SEEBURG acoustic line Produktions- und Vertriebsgesellschaft mbH

Auweg 32

89250 Senden-Freudenegg

Germany

07307 / 9700 – 0

www.seeburg.net

[email protected]

Содержание Galeo System





















Результаты поиска

Содержание Galeo System

Отзывы:

Похожие инструкции для Galeo System

Бренды по названию

Популярные бренды

Seeburg Galeo System, Руководство пользователя

Результаты поиска

Содержание Galeo System

Отзывы:

Похожие инструкции для Galeo System

Бренды по названию

Популярные бренды