12
8.
MODE
button allows you to choose one of three settings. The lights to the right of the
MODE button indicate which mode is activated.
• When the top RED light is lit, only FAST mode is activated.
• When the bottom GREEN light is lit, only RAW mode is activated.
• When both the top RED and bottom GREEN light are lit, the Two-Stage Sequential
Temperature-Timer is activated (both FAST and RAW mode are activated).
The three settings:
1) FAST mode: The average internal temperature levels will be maintained at the indicated
temperature. As the heating element cycles on and off, internal temperature will rise
and fall. The indicated temperature is the average temperature maintained by the
Sedona Combo. (See chart on page 13).
2) RAW mode: Internal temperature will never go above the indicated temperature.
Indicated temperature is not the average temperature, indicated temperature is the
maximum temperature that the machine will go up to. This is useful for preserving
certain vital nutrients that can degrade at high temperatures. (See chart on page 13).
3) COMBO mode: Uses the Two-Stage Sequential Temperature-Timer to set the two
temperature/time settings. It starts at a higher temperature for a set time (FAST mode)
then automatically drops down to a lower temperature for a set amount of time.
• FAST mode: The first temperature setting and is set at a higher temperature to
encourage more initial dehydrating, less spoiling/fermenting of foods.
• RAW mode: The second temperature setting and is set at lower temperatures for
longer times.
9.
START/PAUSE button
is to restart or pause operation.
NOTE:
• While the Tribest Sedona Combo is in operation, if you open the door the power
supply to both the heating coil and the fan will be cut-off. The Tribest Sedona Combo
will automatically restart as soon as the door is closed.
• You will hear a buzzing sound when the buttons are pressed, when the door is opened,
and when the assigned time is over.
• To change the temperature and/or operation hours while the Sedona Combo is running,
press the START/PAUSE button, then press the SET button and change the temperature
and/or time. Then press START/PAUSE button to re-start the Sedona Combo.