Secutron MR-2320 Series, Инструкция по установке и эксплуатации

Страница: 52 / 92

52
Configuration
9.6 2. Set Time (Command-Menu)
Note: Refer to How to Use the Keypad to Program the MR-2320 on page 44 for
detailed instructions on making menu selections.
Command Menu/Set time Date
1. Daylight saving
time
[X] DISABLE ->Default
[ ] ENABLE
Use this function to enable
daylight savings time.
Command Menu/Time Clock
2. Set time and date
Default
00:00 MON 2000-01-01
Use this function to set the
time and date. Use the
“LEFT” and “RIGHT” keys to
move the cursor to the
desired location in the
display and use the “UP”
and “DOWN” keys to
increase or decrease the
values. Press the “ENTER”
key to accept the changes
and the “CANCEL” key to
ignore the changes.
Note: time is in 24hr format
Command Menu/Time Clock
2. Compensation
When value is entered the following message
will appear
Default: 0 seconds
(no compensation)
Compensation values
can range from -15 to
+15 seconds.
Use the up down arrow keys to
select daily compensation
value and press ENTER. For a
fast clock adjust negatively. For
a slow clock adjust positively.
For example: for a clock which
runs 5 minutes a month (based
on 30 days) fast select -10
seconds.
i
1. Daylight Save
2. Time Clock
3. Compensation
D a y l i g h t S a v i n g
[ X ] D I S A B L E
HH:MM WKD YYYY-MM-DD
00:00 MON 2000-01-01
H H : M M W K D Y Y Y Y - M M - D D
0 0 : 0 0 M O N 2 0 0 0 - 0 1 - 0 1
Daily Compen. (Sec):
Panel Config Updated