SecurView HDMIEXTMINI50M, Руководство пользователя

Страница: 6 / 11

Receiver:
1. Connect opposite end of the CatSe or Cat6 ethernet
network cable to the ethernet input of the receiver.
2. Connect the HDMI output plug of the receiver to the
HDMI input socket of your TV or monitor.
3. The video should now be displayed once your source
device and TV /monitor has been turned on.
If you notice the video not being displayed, then please
press the length button located on the side of the
receiver.
The default length is set at 40m, if you have a different
length ethernet cable then please keep pressing the
length button until the video is displayed.
Note: This unit has power over catS/6 cable (PoC)
technology so only the transmitter needs to be
powered.
The receiver has a USB power socket incase the
transmitter is not receiving enough power from the USB
charger, TV USB socket or third party mains charger.