Installation
1. Locate the strap, bridge clips, strap clips,
cutter, and cutting plate.
2. Lay the square hole of the bridge clip
across the center of BluTag.
3. Firmly press down on the bridge clip to
fully insert its legs. Once fully inserted,
the bridge clip will lay flush against the
BluTag surface.
4. Insert one additional bridge clip.
5. Attach a pair of clips to one end of the
strap. The ends of the clips must align
evenly with the end of the strap (not
shorter or longer).
6. Insert the clipped end of the strap into a
wing of the tag. Pull slightly to ensure
that it is secure.
45
Attach BluTag to Enrollee
1
2 – 4
5
6
Содержание BLUtag
Страница 12: ... BluTag attempts to acquire GPS once every minute Overview Overview How BluTag Uses GPS 12 ...
Страница 19: ...Enrollment Enrollment Creating an Enrollee Profile Adding Enrollee Addresses 19 ...
Страница 80: ...Unassignment Unassignment Unassign BluTag Remove BluTag From Enrollee 80 ...