Securitytec PTZ10EXPRO, Инструкция по эксплуатации

Страница: 29 / 54

30
when the PTZ positions itself to this preset position.
Press IRIS CLOSE button to exit and return to the previous
menu level .
5.2.2.3 Coordinates
Move the joystick up or down to the desired selection.
Move the joystick Left or Right to select ON or OFF
Based on your selection the On-Screen X-Y position
coordinates will be displayed at the bottom of your screen.
Press IRIS CLOSE button to exit and return to the previous
menu level.
5.2.2.4 Start Up Message
Move the joystick up or down to the desired selection.
Move the joystick Left or Right to select ON or OFF
Based on your selection the startup message (see below) will be
displayed on Power Up.
This is particularly useful when you do not know what is the
address or communication setting of this dome.
Press IRIS CLOSE button to exit and return to the previous
menu level.
The Startup message screen displays the following information:
-
model name
-
Installed camera module
- Protocol of Communication
-
Dome ID No:-
-
Firmware version
This concludes the Display Options Setup menu.
The following section describes Control options for the PTZ functions.