SecurityMan DigiairWatch SM-816DT, Руководство пользователя

Страница: 18 / 36

14
IMPORTANT NOTICE: Exiting from quad view to single channel full screen
(while recording) will halt all recording for all cameras except for the live
camera being displayed.
• In
Single Channel Full Screen Display
you can use the
Camera
button on
the receiver to toggle through all four cameras (when applicable) in full
screen display and then press the
Record
button to start recording when
the desired camera is being displayed on the screen.
NOTE:
Recording in a single camera independently will lock the DVR to
that channel preventing it from being able to toggle to any of the other
available cameras.
Camera button
The
Camera
button is used to toggle back and forth between each camera
in full screen display. In Quad mode, you can press the
Camera
button
to start and stop recording by highlighting the camera and pressing the
Record
button.
Quad Screen button
Pressing the
Quad Screen
button will toggle between single channel full
screen display and a split screen of all the cameras on your system.
NOTE: Audio will not be heard or recorded while in quad screen.
Menu button
Press the Menu button to access the DVR setup menu. The Menu consists
of system Settings, Playback/SD Card, Camera, and Exit. See detail Menu
Setup operation below.
Exit button
Press the
Exit
button at any time to exit out of the menu. The
Exit
button
plays no role in live display screen.
UP, DOWN, LF, RT buttons
Use the
Up
(increase) and
Down
(decrease) buttons on the DVR/Receiver
at any time during live view to adjust the volume level. The
LF
and
RT
buttons plays no role in live display screen.