SecurityMan DigiairWatch SM-816DT, Руководство пользователя

Страница: 28 / 36

24
At this point you can now highlight and select the photo that you
would like to view. While viewing an image use the
LF and RT buttons
to skip or go back to the next/ previous file, press the Record button
to enable/disable a 3 seconds slide show and auto loop through the
picture files, and press the
OK or Exit button to exit to Photos folder.
TIP:
File naming convention: hr-min-sec-Camera#.jpg. It is our
recommendation to install the camera 15~20 ft from the intended
monitoring object and to set motion detection to “Low” for best timely
picture capture in
Photos mode.
• PC Playback
You can playback recorded files on the system when connected to a TV
or monitor as illustrated above or directly from the SD card by inserting
the card into your computers card reader. To playback recorded video
on a PC:
1. Unmount and remove the SD card from the wireless receiver by
gently pushing on the SD card allowing it to pop out from its slot.
2. Insert the SD card into an SD card reader (not included)
connected to your PC (your PC should load the SD card as a new
Removable Drive).
3. When prompted, select the “Open folder to view files” option to view its
contents (you should see two folders labeled
Photos and Videos ).
Video:
Open the
Videos
folder and then open one of the Date folders
(
mm-dd-yyyy
) to view a list of all recorded events for that date. Once
inside the dated folder there is another sub-folders separated by the
hour. Select the hour you want to playback to get to the time file name
mp4 files. Double-click any of the recorded mp4 files (
hr-min-sec-
Camera
#.mp4) and the video will begin playing in your default mp4
media player.