Network Video Recorder NVR Menu
25
5.3.5.1 HDD Manage
HDD manage inteface, as shown in Picture 5-19.
Picture 5-19
If the devices has connected to the HDD successfully, the HDD manage
list will show the information of the HDD(s). If the system detects that you do
not need to format the hard disk, the HDD status will display as “normal”;
otherwise an HDD format will be needed.
HDD No.:
The number of HDD(s) that are connected to the system.
State
：
Detects the current working status of HDD, you could use only
that displays “normal”; After formatting is completed, you need to
restart NVR, the status displays "in use".
Total Capacity
：
The total available HDD capacity, the single HDD
capacity cannot exceed the maximum capacity: 4TB.
Residual Capacity
：
Display the residual capacity of the current HDD;
Device Type
：
SATA.
Refresh
：
Refresh HDD information in the list;
Format
：
Format the HDD, select the HDD that needs to be formatted
first, and then click the "Format" button, pop-up warning dialog
"formatting will result in the selected HDD recording data loss, confirm
that you want to continue
?
", If confirmed ok to format then click on the
"OK" button, otherwise click "Cancel".
Return
：
Return to the former management interface.
Note:
After formatting the HDD, you need to restart the device.
5.3.5.2 Device Upgrade
Left-click the Device Upgrade button in the menu of system maintain,
will switch to the interface of Device Upgrade, as shown in Picture 5-20:
