21
Installation Accessories
Description
Cat./ Part No.
Outside Air Kit
(Required - Included with Fireplace)
Outside Air Coupler to connect outside air UZI to
fireplace, UZIAD
UZIDF
Outside Air Ducting - Includes 4" insulated flex x 10 ft.
long, UZI
UZI
Fireplace Options
Trim Kit - Brushed Nickel
43BNTK
Blower
UZY5
Blower Motor Speed Control
VRUW
Fireplace Model HE43-2 - Approved Venting Components
8" Diameter Chimney
- Model ASHT+, S-2100+, , or AC
manufactured by Security Chimneys International only.
Notes:
1. (Projet NovaTemp™) is equivalent to S-2100+
2. (Projet NovaTemp™) is equivalent to ASHT+
3. This appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for the chimney will be required.
4. Chimney Adaptor (S-2100+ / ) for CANADA ONLY - If you want to
install a S2100+ / chimney, an adaptor is available (8UCA).
5. AC Chimney is Not recommended at elevations above 4000 feet or in very cold
climates where temperatures are likely to fall below 0° F (-18° C). When using
AC chimney, an AC8SB (H3801) starter section must be used before installing
an elbow. When an offset is needed immediately off the top of the fireplace,
a starter section, AC8SB30 (H3802), is available.
OPTIONAL INSTALLATION ACCESSORIES - HE43-2
Installation Accessories
Description
Cat./ Part No.
Forced Air Heating Kit
Starter Kit includes:
blower (BISZY), flex adaptor and
two clamps (BISAF), blower variable speed control
(VRUW), Thermo-disc (VTU), blower flex adaptor
(BISAVF), and back draft damper (BISBD)
BISFWK-1
Flex - Choose 15 feet or 25 feet depending on installation
Flex 5 inches ID x 15 feet Long
5FLEX15
Flex 5 inches ID x 25 feet Long
5FLEX25
Starter Kit Separate Components
Blower flex adaptor, includes damper (BISBD)
BISAVF
Blower - 250 CFM
BISZY
Flex adaptor and two clamps for fireplace connection
BISAF
Blower motor speed control
VRUW
Thermo-disc - turns motor on when fireplace is hot and
off when cool
VTU
Back draft damper
BISBD
Options
Heating / Cooling Thermostat - 110V
HCTW
