User Manual of Network Fisheye Camera
76
Select the day/night switch mode, and configure the smart supplement light
settings from this option.
Day:
the camera stays at day mode.
Night:
the camera stays at night mode.
Auto:
the camera switches between the day mode and the night mode
according to the illumination automatically. The sensitivity ranges from 0 to
7, the higher the value is, the easier the mode switches. The filtering time
refers to the time interval between the day/night switch. You can set it from
5s to 120s.
Schedule
: The camera switches between the day mode and the night mode
according to the configured time period.
Triggered by Alarm Input
: The camera switches to the day mode or the
night mode after the alarm is triggered.
Smart Supplement Light:
Smart Supplement Light function gives user an
option to adjust the power of the IR LED, thus avoiding image
over-exposure.
When the light is turned on, and Auto and Manual are selectable for IR mode.
Select AUTO, and the IR LED changes according to the actual luminance.
E.g., if the current scene is bright enough, then the IR LED adjusts itself to
lower power; and if the scene is not bright enough, the IR LED adjusts itself
to higher power.
Select Manual, and you can adjust the IR LED by adjusting the distance. The
higher the value is, the higher the power of the light would be, and it can
reach objects farther away.
Backlight Settings
BLC:
If you focus on an object against strong backlight, the object will be
too dark to be seen clearly. BLC compensates light to the object in the front
to make it clear. OFF, Up, Down, Left, Right and Center are selectable.
WDR:
Wide Dynamic Range can be used when there is a high contrast of the
