Nnn-0000nn
© Copyright 2012 SecureALL Corporation
Page
17
of
22
All Rights Reserved
As soon as the last battery is installed, a red LED will light up and remain solid for a
couple of seconds. It will then flash on and off five times before turning off. If this
sequence is not observed (i.e., the LED may remain solid red or flash on and off
indefinitely), then there is a problem with the lock. Detach all the cables and repeat Steps
8a-8d. If the required sequence is still not observed, set the unit aside for further
investigation.
10.
Make sure the battery cable is routed to the outside of the battery box via the cable guide
and the flex cable is not "pinched" in any way as the Inside Cover Assembly is routed all
the way onto the Inside Lever. Secure the Inside Cover Assembly with three Escutcheon
Cover Screws (Item 17).
Figure 10a
Figure 10b
Item 17
