Page 7 of 40
BGX701-014-R03, User Manual for PT3 Transducers
Public
3 Important safety information
Local best practice and regulatory stipulations must always be observed. In addition, safety precautions
recommended for installation of electrical equipment should be strictly adhered to. Transducers should be
installed by trained personnel only.
The following symbols have been used in this document or appear on the product.
Risk of electric
shock
Caution
Alternating current
(AC)
Direct current
(DC)
Double
Insulation
3.1 Safety during installing/ uninstalling and servicing
1
Use insulated crimp terminations to make voltage and current connections. Ensure that
the terminal block insulation requirements are always met.
2
Read the information provided on the rating plate carefully before making the
connections or installing/uninstalling the transducers. The rating plate is available on
the right-hand side of the device.
3
Use a switch or circuit breaker to disconnect the auxiliary supply to the transducers.
Mark it suitably and keep it handy for quick access to ensure appropriate safety.
4
If the equipment is not used in the manner specified in the manual, the protection
provided by the equipment may be impaired.
1
Do not touch any exposed terminals during installing/uninstalling or maintenance as
hazardous voltages are present, which constitute a major risk of electrical shock and
can cause severe and permanent injury.
2
Before switching on the transducer device, verify that all connections to the network
have been correctly made.
3
Do not open the secondary circuit of a live CT as the high voltage produced could be
lethal or cause severe injury.
4
Disconnect the power supply before installing the transducer within a panel. The same
instructions should be followed for uninstalling the device.
3.2 Disposal
PT3 transducers should be disposed of in a safe and responsible manner. The regulations applicable within the
country of operation for disposal of the product should be followed.
3.3 Maintenance
PT3 transducers normally require no maintenance. To ensure a robust user experience, please adhere to the
environmental and technical specifications provided by the manufacturer. For any further queries, you may
contact the nearest sales representative.
