Secure Data IS-FL-DA-256-4, Руководство пользователя

Страница: 8 / 25

Rev. 20190204A
To Contents 8 of 25
The USB drive is unlocked in Read-Only Mode and for thirty seconds is ready to be
inserted into your computer. If not inserted, it will still be in Read-Only Mode the next time
it is unlocked.
NOTE: When plugged into your computer in R-O Mode, the green LED blinks very slowly
to distinguish it from the regular R/W Mode. Also, if you try to save or delete a file
your computer will display a message.
E
NABLING
R
EAD
/W
RITE IN
U
SER
M
ODE
Read-Only (Write Restriction) can be turned off restoring Read/Write access.
1. Unlock the USB with your User PIN. [ ]
2. Press [ ]
3. Press 7 , 9 (R,W for Read/Write). [ ]
4. Press [ briefly, then ]
The USB KP is unlocked in Read/Write Mode and for thirty seconds is ready to be
inserted into your computer. If not inserted it will still be in Read/Write Mode the next time
it is unlocked.
S
ETTING THE
T
IMEOUT
L
OCK IN
U
SER
M
ODE
To protect against unauthorized access when the USB drive is connected to a host
computer and unattended, the USB drive can be set to automatically lock after a pre-set
amount of idle time (no access or write activity).
NOTE: When set in User Mode, the Timeout Lock is only active in User Mode and not
Admin Mode (unlocked with an Admin PIN).
The default state of the Timeout Lock feature is OFF. The Timeout Lock feature can be
set to activate (lock) any time between 1 and 99 minutes.
1. Unlock the USB with your User PIN. [ ] (Refer to Unlocking the USB in User
Mode on page 6, e
xcept don’t insert into your computer.)
2. Press [ ]
3. Press 8 , 5 (T,L for Timeout Lock). [ ]
4. Press [ ]
5. Enter the length of unattended time for Timeout.
Two digits required. [ ]
Examples:
01 = 1 minute
99 = 99 minutes
6. Press [ briefly, then ]
The Timeout Lock is now set and for thirty seconds is ready to be inserted into your
computer. If not inserted it will retain your Timeout Lock settings until changed.