Rev. 20190204A
To
13 of 25
4. Press
[ briefly, then ]
The USB KP is now unlocked in Read-Only Mode and for thirty seconds is ready to be
inserted into your computer. If not inserted it will still be in Read-Only Mode the next time
it is unlocked.
NOTE: When plugged into your computer in R-O Mode, the green LED blinks very slowly
to distinguish it from the regular R/W Mode. Also, if you try to save or delete a file
your computer will display a message.
E
NABLING
R
EAD
/W
RITE IN
A
DMIN
M
ODE
Admin can override a User-set
Read-Only
state by enabling
Read/Write
using the Admin
PIN.
1. Unlock the USB KP with the Admin PIN. [
]
2. Press
[
]
3. Press
7
,
9
(R,W for Read/Write) [
]
4. Press
[ briefly, then ]
The USB KP is unlocked in Read/Write Mode and for thirty seconds is ready to be
inserted into your computer. If not inserted it will still be in Read/Write Mode the next time
it is unlocked.
S
ETTING THE
T
IMEOUT
L
OCK IN
A
DMIN
M
ODE
To protect against unauthorized access when the USB KP is connected to a computer
and idle, it can be set to automatically lock after a preset amount of time.
In its default state, the
Timeout Lock
feature is turned off. It can be set to activate (lock
the USB) any time between 1 and 99 minutes. Admin
Timeout Lock
settings will override
User settings.
1.
Unlock the USB KP with the Admin PIN. [
on page 11.)
2. Press
[
]
3. Press
8
,
5
(T,L for Timeout Lock).
[
]
4. Press
[ ]
5. Enter the length of idle time for Timeout.
Two digits required. [ ]
Examples:
01
= 1 minute
99
= 99 minutes
6. Press
[ briefly, then ]
The Timeout Lock is now set and for thirty seconds is ready to be inserted into your
computer. If not inserted it will retain your Timeout Lock settings until changed.
Содержание IS-FL-DA-256-4
Страница 1: ...K E Y P A D SecureUSB KP USER MANUAL...
